Reasons Your Water Heater Isn't Functioning
Reasons Your Water Heater Isn't Functioning
Blog Article
They are making a number of great points regarding What Would Cause My Electric Water Heater to Stop Working? as a whole in this great article in the next paragraphs.
Numerous modern residences use an electric water heater for their heating system, because of its benefit and ease of use. Nonetheless, much like any other electrical appliances, troubles might occur with its use, suddenly. It can be really discouraging to wake up to a cool shower as opposed to a hot one or having your bathroom with water that isn't hot adequate or even also hot. Whatever the situation may be, hot water heater problems can be rather nerve-racking. Luckily, we have actually made a listing of possible options to your water heater concerns. There are a variety of elements that might cause much of these issues, maybe a problem with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you switch off the major power supply for security. Whatever the issue is, getting it repaired should not pose way too much of a problem if you follow these steps:
Check Your Power Supply:
As basic as this may seem, it is really essential. Without ample power, your hot water heater will certainly not work. So the first thing to do when your water all of a sudden stops working is to confirm that it isn't a power problem. Examine if the fuse is burnt out or the breaker tripped. If the circuit breaker is the issue, just transform it on and off once more. Change any kind of broken or worn-out fuse. Examine the appliance with power after these adjustments to see if it's now working.
Examine the Heating Element in the Water Heater:
If it's not a power trouble, then try looking into your heating element if it is still working. Test each of your burner to be sure the issue isn't with any of them. If any of them is damaged, replace that component and afterwards check whether the warm water is back on.
Check Your Thermostat:
If your water heater still isn't working or the water appearing isn't hot sufficient, you may require to inspect the temperature level setups on your top thermostat. Make sure the circuit breaker is turned off prior to doing anything. Open the access panel and also press the red switch for temperature level reset above the thermostat. This should aid warm the water. Turn the circuit breaker back on and examine if the problem has actually been settled.
Call A Specialist:
If after changing all malfunctioning components as well as resetting your temperature, the water heater still isn't working, you might require to call an expert plumber for a professional opinion. The problem with your heater could be that the hot and cold taps have been switched or it might be undersized for the quantity of warm water required in your home. Whatever the situation might be, an expert plumber would certainly aid solve the problem.
Conclusion
Water heater issues are not always major. Much of them result from small concerns like a blown fuse or damaged burner. Changing the damaged components need to suffice. However, if you are still unable to solve the problem, give a call to your nearby plumber ahead to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you liked our article on How to Troubleshoot and Repair an Electric Water Heater. Thank you for spending some time to browse our piece. Feel free to take the time to distribute this content if you enjoyed reading it. Thank you so much for taking the time to read it.
Show Details
Report this page